Tri-American, Inc.

Manufacturer of Asphalt Protection Products

About Us

New Products

TA Products

Crafco Material

Equipment

Patching

HFS

Rentals

Service

Contact Us

Tri-American, Inc. Products
Tri-American, Inc. Manufactures high quality asphalt protection products and is the Northern California distributor for Crafco crack sealants and Pavement Preservation Products. Tri-American, Inc. also sells and rents a large selection of equipment to assist in the application of these products including hand tools, seal coat tanks and Crack Sealing Melters.
  • Poly-Kote Sealer, TA-1000
  • Inductive Loop Sealant, TA-500
  • Hot Pour Loop Sealant, TA-3000 
  • Crackfiller, TA-300
  • Poly-Kote Additive, TA-200
  • Oil-Seal, TA-100
  • Poly-Krete Resin, TA-2000
  • Parking Block Adhesive, TA-400

 
Poly-Kote TA-1000 Sealcoat
Before TA-1000 Treatment, Click on picture for Specifications

Poly-Kote Sealer, TA-1000

TA-1000 is a special blend of asphalt emulsion mineral fibers and polymers formulated to fill voids and provide a smooth, black surface. TA-1000 protects asphalt surfaces and is the preferred choice by contractors for all their sealcoat needs whether for parking lots, driveways, playgrounds, tennis courts or other asphalt surfaces.


Poly-Kote Additive, TA-200


Poly-Kote TA-200 Acrylic copolymer emulsion is designed to modify Poly-Kote TA-1000 asphalt base sealer to increase toughness and flexibility, and enhance the suspension of fillers. It also improves color and oil/gas resistance and increases protection from damaging ultra-violet rays.


Oil-Seal, TA-100


TA-100 is an Acrylic copolymer emulsion designed to seal oil and gas in contaminated areas of asphalt and to improve adhesion of Poly-Kote TA-1000.


After TA-1000 Application / Click image for MSDS
Loop Sealants
Click Picture for Specifications

Inductive Loop Sealant, TA-500

TA-500 is a Single component asphaltic emulsion sealant designed to fill and seal inductive loop slots. TA-500 contains a modified polymer and it offers greater flexibility and adhesion for both asphalt and concrete slots. Tri-American's TA-500 Meets or Exceeds the State of California specification (Caltrans #8040-41a-15) for asphalt emulsion sealant.


Click on picture for specifications




Poly Loop TA-3000


Poly-Loop TA-300 Loop Detector Sealant is a Hot-Melt Rubberized Asphalt Sealant designed to fill and seal sawcuts in both Asphalt and PCC Concrete surfaces.  Poly-Loop TA-3000 contains no reclaimed rubber.  Poly-Loop TA-3000 was designed with select resins and plasticizers that give this product highly elastomeric and bonding properties.  Tri-American, Inc. Poly Loop TA-3000 Meets or Exceeds Caltrans Specifications 86.501A
Cold Pour Crack Sealant
Crackfiller, TA-300


TA-300 Cold pour crackfiller is a blend of asphalt emulsion, fillers and is modified with a blend of three select polymers for greater flexibility and adhesion to asphalt or concrete surfaces.  TA-300 is ready to use right from the bucket and can be easily applied by contractors and home owners.


Before Cracksealing - Click Picture For Specifications
After Cracksealing - Click Picture for MSDS
Concrete Repair
Poly-Krete, TA-2000


Poly-Krete TA-2000 is a "Select blend" of polymers designed to modify portland cement.  When added to our blend of portland cement and sand, POLY-KRETE provides properties never before achieved by portland cement concrete. 

POLY-KRETE, when applied in accordance with Tri-American, Inc. specifications, offers superior adhesion to permanently repair and/or resurface virtually and sound, stable substrate.

POLY-KRETE may be applied in 10 to 60 mil thickness for normal concrete resurfacing by squeegee, trowel, straight edge, or spray application.  For spalled, pitted, rough or raveled areas, a "dry" mix may be first applied to all areas in need of "deep lift repair".  Deep lift repairs may be as thin as 125 mils to as thick as 1,500 mils, without delamination.  You can add standard concrete colored dies to customize POLY-KRETE for a custom finish.


Before - Click on picture for specifications
After
TA-400 Parking Block Adhesive
Click on picture for specifications
TA-400 is a Single component asphaltic mastic designed to adhere concrete parking blocks to asphalt surfaces and is easy to use.
 
Application Tools








We sell a complete line of hand tools and cleaning solvents for all of your application needs.